Engineered for the Corvette C8 owner who demands the best, this premium materials upgrade delivers real performance gains by delivering measurable performance gains. At Jesse Iwuji Performance, every product we carry is vetted through the lens of NASCAR-level engineering — if it doesn't make the car faster, better-handling, or more capable, it doesn't make the cut. Designed for straightforward installation, this is a direct-fit upgrade that speaks for itself on and off the track.
Premium Modified, Ported, and Calibrated Throttle Bodies.
For 5.5L V8 engines (LT6).
Corvette 8, Z06 (2023+).
Please note: Only sold as a pair.
Enhanced Performance Replacement for P/N: 12713793, 12729502.
1 YEAR WARRANTY*.
LIMITED QUANTITIES - 1 WEEK DELAY
PERFORMANCE (PER UNIT):
• Wide-open throttle flow: 1165 +/- 20 SCFM @ 20.4” of water vacuum [20% increase over OEM (970 SCFM)]
FEATURES:
• Optimized Active Contours with sonic flow nozzles
• Porting Taper and Upstream Bore with Velocity Stack
• Greater Discharge Coefficient of Plate/Blade interface
• Shaftless high-pressure side of the blade for Larger WOT Flow Area (91 mm Effective Bore)
• Dome and Thread-locked Screws
• 16 Ra Microinch, Diamond Polished Surface Finish
• Self-Cleaning Throat/Flow Gap
• Dimpled shaft trailing edge
BENEFITS:
• Lower weight to power ratio at part throttle, for a more nimble/spirited driving experience
• Linearization and smoothing of the curve for a more predictable response and crisper shifts
• Immediate response right off idling while keeping idling function undisturbed (No Hesitation/Stumble)
• Does not require tuning. Warranty safe.
• More air/power at every single throttle position after idle. Crucial for starting or expanding power gain modifications
WHAT’S INCLUDED:
• A pair (2) of SE3793-91 Premium Modified, Ported, and Calibrated Throttle Bodies.
Engineered for the Corvette C8 owner who demands the best, this premium materials upgrade delivers real performance gains by delivering measurable performance gains. At Jesse Iwuji Performance, every product we carry is vetted through the lens of NASCAR-level engineering — if it doesn't make the car faster, better-handling, or more capable, it doesn't make the cut. Designed for straightforward installation, this is a direct-fit upgrade that speaks for itself on and off the track.
Premium Modified, Ported, and Calibrated Throttle Bodies.
For 5.5L V8 engines (LT6).
Corvette 8, Z06 (2023+).
Please note: Only sold as a pair.
Enhanced Performance Replacement for P/N: 12713793, 12729502.
1 YEAR WARRANTY*.
LIMITED QUANTITIES - 1 WEEK DELAY
PERFORMANCE (PER UNIT):
• Wide-open throttle flow: 1165 +/- 20 SCFM @ 20.4” of water vacuum [20% increase over OEM (970 SCFM)]
FEATURES:
• Optimized Active Contours with sonic flow nozzles
• Porting Taper and Upstream Bore with Velocity Stack
• Greater Discharge Coefficient of Plate/Blade interface
• Shaftless high-pressure side of the blade for Larger WOT Flow Area (91 mm Effective Bore)
• Dome and Thread-locked Screws
• 16 Ra Microinch, Diamond Polished Surface Finish
• Self-Cleaning Throat/Flow Gap
• Dimpled shaft trailing edge
BENEFITS:
• Lower weight to power ratio at part throttle, for a more nimble/spirited driving experience
• Linearization and smoothing of the curve for a more predictable response and crisper shifts
• Immediate response right off idling while keeping idling function undisturbed (No Hesitation/Stumble)
• Does not require tuning. Warranty safe.
• More air/power at every single throttle position after idle. Crucial for starting or expanding power gain modifications
WHAT’S INCLUDED:
• A pair (2) of SE3793-91 Premium Modified, Ported, and Calibrated Throttle Bodies.
Image 1 of 5
Image 2 of 5
Image 3 of 5
Image 4 of 5
Image 5 of 5